1. Home
  2. Vol 1, No 1
  3. Fathony

Rancang Bangun Prototype ESP untuk Pengendapan Debu Limbah Industri dengan menggunakan Transformator Flyback

Author


Achmad Fiqih Fathony(1Mail),
(1) Universitas Trunojoyo Madura, Indonesia

Mail Corresponding Author
Article Analytic
  [File Size: 726KB]  Language: en
Available online: 2023-03-10  |  Published : 2023-03-10
Copyright (c) 2023 Achmad Fiqih Fathony
Article can trace at:

Article Metrics

Abstract Views: 0 times PDF Downloaded: 0 times

Abstract


In this study ElectroStatic Precipitator (ESP) is one of the alternative dust catchers with high efficiency (reaching above 90%) and the range of particles obtained is quite large. The purpose of this research is to know the process of making ESP prototypes, to know how flyback transformers work as high voltage suppliers on ESP prototypes and to know the capture of industrial waste dust. This research uses experimental engineering methods. The shape of the prototype electrostatic precipitator is made using materials from acrylic, wood, and paralon 2 1/2 dim. From the results of testing and efficiency calculations on electrostatic prototype precipitators that have been conducted. The working principle of this tool when the control circuit switch on to the EC Centrifugal Fan will work for 40 seconds, the speed of the EC Centrifugal Fan can be set by rotating the potensio meter in the controller room. After 40 seconds EC Centrifugal Fan will ma. After 40 seconds the EC Centrifugal Fan will die and the hammer motor will work for 20 seconds to knock out the dust attached to the CE plate.

Keywords


Ardiuno UNO; Electrostatic Precipator; DC Motor

References


HARIS, M. (2021). PROTOTYPE PENGENDALI PINTU AIR OTOMATIS PADA SALURAN IRIGASI BERBASIS MIKROKONTROLLER ESP 32 (Doctoral dissertation, Universitas Mataram).

Hadi, C. C. F. (2020). PROTOTYPE SISTEM CONTROL BERBASIS INTERNET OF THINGS PADA PENYINARAN KEBUN BUAH NAGA. CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, 4(1), 56-60.

Debataraja, C. L. B., & Krisnadi, I. PERANCANGAN PROTOTYPE SISTEM MONITORING KOMPARASI JARAK JAUH SENSOR SUHU MENGGUNAKAN IOT SELAMA MASA PANDEMIK COVID-19 DI INDONESIA.

ADIYANTO, A. N. (2020). PROTOTYPE MESIN PENGISI GALON MANDIRI PADA DEPOT AIR MINUM MENGGUNAKAN RFID (RADIO FREQUENCY IDENTIFICATION) DAN ADAFRUIT IO (Doctoral dissertation, Universitas Mercu Buana Jakarta).

Ibrahim, A. M., & Setiyadi, D. (2021). PROTOTYPE PENGENDALIAN LAMPU DAN AC JARAK JAUH DENGAN JARINGAN INTERNET MENGGUNAKAN APLIKASI TELEGRAM BERBASIS NODEMCU ESP8266. Infotech: Journal of Technology Information, 7(1), 27-34.

Wicaksono, M. H. D., & Aribowo, W. (2019). Pengendalian Motor DC Menggunakan Arduino Uno Pada Rancang Bangun Electrostatic Precipitator. INAJEEE (Indonesian Journal of Electrical and Electronics Engineering), 2(2), 29-33.

DWI, Mochamad Hanif; ARIBOWO, Widi. engendalian Motor DC Menggunakan Arduino Uno Pada Rancang Bangun Electrostatic Precipitator. Indonesian Journal of Engineering and Technology (INAJET), 2019, 1.2: 69-73.

Dwi, M. H., & Aribowo, W. (2019). engendalian Motor DC Menggunakan Arduino Uno Pada Rancang Bangun Electrostatic Precipitator. Indonesian Journal of Engineering and Technology (INAJET), 1(2), 69-73.

Muhardian, Reza, and Krismadinata Krismadinata. "Kendali Kecepatan Motor DC Dengan Kontroller PID dan Antarmuka Visual Basic." JTEV (Jurnal Teknik Elektro dan Vokasional) 6.1 (2020): 328-339.

Ningrum, H. N. K., Artono, B., Haryo, R. J. K., & Ardiansyah, S. D. (2020). Rancang Bangun Prototype Electrostatic Precipitator (ESP) Sebagai Penangkap Debu Asap Paska Pengelasan. JREC (Journal of Electrical and Electronics), 8(2), 67-74.


Refbacks

  • There are currently no refbacks.